SON XS-M for HP Velotechnik
For slotted axle mount, that works as cable exit, too
Weight: 530 g
Axle end: Ø 12 x 42 mm (from collar)
Rotor position from collar: 5 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 36 hole | 220611 |
|---|---|
| black anodized | |
| RRP in D 369,00 € | |
SON XS-M for Anthrotech
Weight: 530 g
Axle end: Ø 12 x 40 mm (from collar)
Rotor position from collar: 7 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 32 hole | 221211 |
|---|---|
| black anodized | |
| RRP in D 369,00 € | |
SON XS-M for ICE Trike
Weight: 530 g
Axle end: Ø 12 x 54 mm (from bearing)
Rotor position from collar: 5 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 36 hole | 223601 |
|---|---|
| polished | |
| RRP in D 369,00 € | |
SON XS-M for Steintrike
Weight: 530 g
Axle end: Ø 12 x 54 mm (from collar)
Rotor position from collar: 5 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 32 hole | 224211 |
|---|---|
| black anodized | |
| RRP in D 369,00 € | |
SON XS-M for KMX
Weight: 530 g
Axle end: Ø 12.7 x 35 mm (from collar)
Rotor position from collar: 5 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″, conforms to German legal regulations
| 32 hole | 226210 |
|---|---|
| black anodized | |
| RRP in D 369,00 € | |
SON XS-M for Christiania Cargo Bike
Weight: 530 g
Axle end: Ø 12 x 69 mm (from collar)
Rotor position from collar: 16 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 36 hole | 227601 |
|---|---|
| polished | |
| RRP in D 369,00 € | |
SON XS-M for Aidoo Trailer
For slotted axle mount, that works as cable exit, too
Weight: 530 g
Axle end: Ø 12 x 13.6 mm (from collar)
Rotor position from collar: 11,4 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 36 hole | 228601 |
|---|---|
| polished | |
| RRP in D 369,00 € | |
SON XS-M for Catrike
Weight: 530 g
Axle end: Ø 20 x 37.4 mm (from collar)
Rotor position from collar: 15,4 mm
6 Volt / 3 Watts for wheel size 16″ up to 20″ conforming to German legal regulations
| 28 Loch | 222811 |
|---|---|
| 32 Loch | 223211 |
| black anodized | |
| RRP in D 369,00 € | |
Connector for SON XS-M
-
Male connector SON XS-M 72100 Female connector SON XS-M 72101 RRP in D 7,70 €
Cable splitter for SON XS-M
-
72616 RRP in D 27,00 €
-
Optimized Generator
The claw-pole generator has its coil in the centre. Sheet metal parts are made with elaborate workmanship. Thus unrivalled low no-load lossses are achieved.
-
Pressure Compensation System
Best possible protection against water ingress is realised by the unique pressure compensation system.
-
High-Quality Bearings
SON hubs are long-life and maintenance-free due to high-end bearings sealed on both sides from SKF.
-
Precise Spoke Holes
Precise spoke holes with large countersinks are a must for loadable wheels. This is why it will be sufficient to true the wheel only once.
-
Reliable Wiring
As connections robust 4.8 mm spade connectors are used. They make a safe connection, when professionally crimped onto SON coaxial cable.